Support — BeatMaker Forums

How to choose the perfect PayID casino for slots in Australia

katanamen — Thu, 23 Jan 2025 18:32:37 +0000

There are so many casinos now that choosing the best is not so easy. Especially when it comes to establishments that support PayID payments. For me, it is important that there are not only convenient payment methods, but also high-quality slot machines. This means high RTP, bonuses and interesting themes. I want to find a casino that combines reliability, security and a good selection of machines. It would also be useful to hear feedback from other players who have already tried their hand at such places.

Moving key

Fruitbat1919 — Tue, 23 Jan 2018 11:32:15 +0000

Having programmed in a bassline in Rozeta in two sections in different keys, I then recorded that down to midi and stopped the sound from responding to Rozeta.

Coming back to this save after a couple of updates, I find that the bassline now sounds different! The recorded midi has now changed key! So, I went and looked at the Rozeta baseline and low and behold that had changed key too!

This seems to have happened on two separate savesof different songs.

These are just odd song part ideas and hardly important, but it’s a really odd happening. The things that are the same are the following:

A Rozeta baseline has changed key each time.
Recorded midi has changed key each time.
It is the same bass sound on two different song part saves!
So far, I have not found this to have happened anywhere else or with any other Rozeta parts that have been recorded to a midi track.
The two changes are both on saves that have not been used since updates with both BM3 and Rozeta.

Or maybe I’m just going nuts lol

Recording Ruismaker Noir into BM3

nlong5 — Sun, 24 Feb 2019 21:26:32 +0000

Hey guys I could really use some help here. I’m kind of a noob at iOS workflow and relatively new to BM3. I have a sequence set up as a plug-in and it sounds nice, but I cannot for the life of me find a way to record it onto a track in the sequencer. I have this issue with most of my AUv3s. Please any advice would be fantastic.

(Sorry, new to the forums, I posted this in the wrong section before.)

Explode pads to edit notes in piano roll

Heyez — Tue, 18 Jul 2017 11:14:17 +0000

If I have a bank with pad 1 kick, pad 2 snare, pad 3 bass.. How would I edit the bass notes in a sequenced pattern? I'm just seeing one row per pad, no piano roll per pad? Am I missing something obvious? Thanks

Controlling Bleass Voices with midi in BM3?

cte — Mon, 06 May 2024 13:06:29 +0000

Hi all.

I’ve just purchased Bleass voices. I would like to be able to use it inside BM3 (so I can record midi notes which change the pitch of an audio input). I’m totally stuck with it though. 😂 Anyone used it? What method/methods do you use? I’m fairly new to voice/vocoder stuff. I’ve found it all quite confusing. I did manage to get DerVoco working, thanks to a thread on this forum, using one channel for the carrier and the other channel for the midi/synth. I’m guessing Bleass Voices doesn’t work in that way. Any help, most appreciated. Thanks!

Should I update my ipad 3 to ios 8?

DeeJohnson — Sun, 23 Nov 2014 14:13:38 +0000

I'm asking because my ipad is currently on ios7 and is working good but ios 8 does add new features. My only worry is if I put ios 8 on my ipad if it will slow down my ipad and ruin the stability I have with beatmaker 2. With this said, to those who have an ipad 3 did it slow down your ipad or ruin you beatmaker 2 experience?

ERROR: "Some samples couldn't be found..."

blisshome — Sat, 29 Feb 2020 18:45:53 +0000

This error message comes up when loading a session. I choose "Search the whole BM3 directory..." and after a moment the session loads, but when I save and reload, I get the same error message on loading. I've tried saving and rescanning the database--same result. I've tried saving and hard resetting the database--same result.

What am I missing here, or is this a bug?

travel

igravittion — Tue, 11 Mar 2025 15:56:52 +0000

What is important to know and take into account so that trips are comfortable and interesting?

Latency issues

qamarmood — Tue, 25 Dec 2018 03:14:54 +0000

Hi I'm new to the community I bought a iPad pro 11 inch and sold my MacBook pro. I thought the iPad pro would be strong enough for my mobile production needs , turns out it's been nothing but a headache . If I use More than 1 instance of a AU I get all kinds of CPU spikes , but since I've downloaded the new beta it has stabilize a bit .. also I'm getting latency issues using the on screen pad and my USB midi keyboard. I really love bm3 I actually like it for production better than logic and that says a lot ... So I have a few questions are there any settings I can do to my iPad to make it play nice with bm3? Why can't I set my buffer to 64 it always changes when I go to another tab , and will getting a external sound card help with my audio issues? I really don't wanna have to go back to the MacBook pro it's not looking good ATM thanks for any advice

Midi MPC 2000/XL?

JustamanBeatz — Thu, 06 Sep 2012 20:21:51 +0000

What's going on BM2 musicians? I'm new to the forum and was wondering what are some of your experiences with using an MPC 2k/XL as a midi controller for BM2? I miss using MPC 2k pads but I love BM2!

Sorry if this has already been posted, I looked for it but didn't find anything.

Thanks
Justaman Beatz

How to Audition Multiple Layers in Sampler Individually

ampapps — Tue, 08 Jan 2019 21:20:42 +0000

[ Audition Samples in Sampler

NOOB Needs Help with Midi Focus Issues

jointeffort — Thu, 20 Aug 2020 17:18:23 +0000

Hi All,

Forgive me but I need help. Every time I try to assign my pads on my Akai MPD218 using the midi focus section of settings, the app does not remember or bind the correct input. For example, I hit "trigger pad 1" and then tap pad 1 on the akai, the binding goes from "none" to "mpd218 Port A: Chan.1: CC 12". Then I hit "trigger pad 2" and then tap pad 2 on the akai. The binding goes from "none" to "mpd218 Port A: Chan.1: CC 3" or it will or "......Chan.1: CC 13" or ".......Chan.1: CC12". No matter what it changes the Trigger Pad 1 binding back to "none".

When trying to "Auto Learn", the loop icon in the top tool bar starts flashing/stuttering and when pressing pads on the akai, nothing gets binded or sometimes it will randomly bind to 2 or 3 pads without me pressing anything at all.

This cannot be rocket science. I've followed instructions, videos, manual etc. What am I missing?

Please help. Thank you!

How to Convert and Upload MBOX Archive to Google Workspace fast

carlielevins_181 — Fri, 25 Apr 2025 10:06:46 +0000

If you want to convert and upload your MBOX archive to Google Workspace quickly, you need the highly recommended tool for it. You can use Enstella MBOX Converter Software with more advanced features. The software ensures a smooth, fast, and error-free process. It is perfect for professional email migration without data loss. This tool directly converts your MBOX files to PST or directly to Google Workspace seamlessly. It is very user-friendly & flexible.

Synthmaster player no sound in bm3

proudtiger — Thu, 20 Jul 2017 11:04:55 +0000

I can't get this darn synth to work in bm3.
Loads up in bm3 but no sound is heard.

I have an ipad air 2.

This synth is driving me nuts lately,sent them an email as well as it refuses to load in audiobus 3 and cubasis 2.

ty.

HARD RESET - [Solved] :-)

KING — Fri, 15 Sep 2017 16:09:01 +0000

Has anyone used this?

Do you get a warning pop-up?

What gets reset?

(Please no guessing!) 'HARD RESET' experts only!

I don't usually ask questions on forums, but every time I'm on that screen (since 3.0.2) I'm having to be extra careful not to touch/press that button. I think it's the only button I haven't pressed.

Cheers,

King

@mathieugarcia ?

Korg NanoPad 2 not triggering drum pads

benetom — Thu, 21 Feb 2013 14:19:57 +0000

Can I ask for some help on my Korg NanoPad 2 controller not triggering drum pads in BM2 ? It work ok with keyboard sampler, but I can not use it for drum pads no matter what I do...I changed octaves up and down in controller...still no response.
Controller work flawlessly in other apps, like iMPC,...

Thanks for any help....

How do you pitch samples without speed changing?

solada12 — Tue, 19 Mar 2019 10:08:21 +0000

Hello everyone!
I’m a little new to beat maker 3, i’m still learning everything and overall i have been having tons of fun!
I’m just having a slight issue with the sampling part of it. I can’t seem to change my sample’s pitch without it going faster/slower which then makes it not go along with the BPM. Even if I check it’s BPM after it’s been pitched down or up, it says that it’s still the same, even though it clearly is not.

If someone can please help me that would be very appreciated.

Simple way to convert MBOX to PST using User-friendly Software

carlielevins_181 — Fri, 02 May 2025 08:30:03 +0000

If you are looking for a simple way to convert MBOX to PST format using User-friendly software, you need the most popular tool of 2025. You can use Enstella MBOX Converter Software with an advanced algorithm. This tool offers a user-friendly solution that makes the process smooth and efficient. Whether you are migrating emails from Thunderbird, Apple Mail, or other MBOX-supported clients to Outlook, this tool handles it all with just a few clicks. This tool is ideal for professional and everyday users needing quick, accurate results.

Read More - Convert MBOX to PST

control multiple samplers from 1 midi keyboard

offthesky — Thu, 08 Mar 2012 20:37:52 +0000

is it possible to control say, two drum machines and a sampler from one keyboard? i.e.octave c3-c4 would trigger drum machine 1, octave c4-c5 would play the sampler, and octave c6-c7 would play drum machine 2. is this at all possible? or can you only play the instrument that's currently opened up?

iPhone 6 - audio dropout, studder, pop, cracking

oivivio — Fri, 17 Oct 2014 11:46:23 +0000

Hi!

I'm having audio issues with BM2 on my iPhone 6. When I bounce between an opened IAA and BM2, move to different screens within the app and even if my screen goes to sleep and I re-enter my password, audio becomes distorted, producing popping, dropouts and crackling for about 2 seconds. This also occurs when I make sudden movements on my midi controller - Korg nanokontrol. Has anyone else experienced issues like this?

I thought it was my phone but then I tested Garage band, it has no issues when I bounce between IAA, other apps or when I use my midi controller. I watched BM2 audio engine and memory in settings but everything is super low. I think BM2 is a great app but am a little disappointed with the glitchy performance, especially paying the full $20 for the app.

Any help would be greatly appreciated

Thanks!

Unable to Delete Instrument Track

SWIM — Fri, 27 Apr 2012 05:48:51 +0000

I am very confused as to how to remove an Instrument track on one of my projects. When I long press on the instrument in question and the menu box pops up that has the delete button in it, the recording button is always active, and the delete button is not clickable. Note that it is not the only instrument on the project either. Any ideas how to get around this?

Delete Empty Tracks

BuleriaChk — Wed, 01 Feb 2017 21:49:39 +0000

How do I delete empty tracks? I added a couple inadvertently, and can't delete them - the option isn't there..

Fade in/out in audio track wav editor

Heyez — Sat, 12 Aug 2017 11:07:22 +0000

What's the quickest way to apply Tiny fade in/out on a 16 bar clip? Just to kill a click/pop.

Need to check the manual but last time I briefly tested the fade out/in it would fade the full length of the sample. Some kind of 'fade' button that then allowed you to apply varying fade in/out via touch would be great. Maybe it's there already and I missed it?

Or even a 'fix click/pop' option that auto applied a small fade in and small fade out..

MIDI learn problem - mixer MUTE

dainebag — Wed, 11 Jan 2017 02:11:00 +0000

Hey guys, I am loving beatmaker 2 but I am having one problem and I'm wondering if you can help me out.

I assigned one of the tracks 'mute' button to my controller using midi learn but I want to change it now however, I cannot for the life of me find where to change it?

I know how to do it with all the other midi CC's. simply go to the midi icon in the bottom right corner of each instrument etc but for the solo/mute buttons in the mixer I cannot find the midi options and how to unassign it.

Any help?

Help with MIDI to split drum pads and keys

NotaBeatmaker — Sun, 03 Jul 2022 15:57:21 +0000

I can't figure out Beatmaker's midi mapping. I have a Nektar Impact LX Mini keyboard which has 8 pads & 25 keys. I set the drum pads to midi channel to 10. The keys I set to midi channel 1 (switchable for multiple instruments). I setup two banks in beatmaker A & B. In back A I placed a virtual instrument piano. In bank B I have drum samples. No matter what I do I can not get Bank A (virtual instrument) to play. It ONLY plays when I use the drum pads AND I must have that bank selected.

Basically all I want to do is have all midi channel 1 to go to bank A even if I am on Bank B. And I want all midi channel 10 to go to Bank B no matter what bank is currently selected. Basically all I want to do is play drums with the pads and play a virtual instrument with the keys at the same time. I know it can be done, but I can't seem to figure it out.

Always save with samples: how to?

dswo — Tue, 03 Dec 2013 17:47:05 +0000

I'm moving my projects to a new iPad and resaved all of my projects with samples. That wasn't horrible, but I'd like to be better organized in the future.

Is there a way to make BM2 always save new recordings/samples in the project_samples folder? I understand how to do that with "Save As," but that requires a new folder every time.

Audio Units Not showing up in list

daleknwk — Wed, 26 Jul 2017 17:22:09 +0000

I have BeatMaker 3 installed on a new iPad Pro. There are only a few AU that show up on the list. I have too many installed to list, but for example, all of the Audio Damage AUs and all of the Kymatica Effects are installed but do not appear on the list. Any idea on how I can remedy this? Thanks.

Configure how MIDI velocity affects sample's volume

midiscripts — Fri, 20 Oct 2017 01:52:39 +0000

Hi Beatmakers,

I use BM3 for finger drumming with velocity sensitive pads.
My question is about how exactly MIDI velocity (from a controller) affects sample's volume.

I saw Low Vel and High Vel settings in mapping. Let's say I set low value to 10 and high to 100. If my MIDI controller sends 101 will BM play sample with 100 (or some other value) or simply won't play it at all?
Let's say I want output volume be always between some value A and value B and calculate it according to incoming MIDI velocity. For example, if MIDI velocity is 1 then output is A. If MIDI velocity is 127 then output is B. And all values in between by simple formula. Is it possible to configure BM3 that way?
Ableton Simpler has a setting called Vel > Vol, which determines how much MIDI note velocity affects sample's volume. Is it possible to have something similar in BM3?

According to my experiments the current configuration capabilities are very limited, so please consider this as a feature request.

low memory message

willg — Mon, 14 Feb 2011 08:43:02 +0000

Hi....

I've been getting low memory warnings with BM2 on my iPodT 4g resulting in the program crashing. The device has about 120 meg free when I start the app. Anyone else having this problem?

MPK MINI using too much power :-(

DeeJohnson — Thu, 14 Feb 2013 02:20:12 +0000

Anyone have any advice for a midi controler using too much power?

I have been using my mpk mini with beatmaker 2 lately and I love it.

But for some reason I keep on getting a power issue message when ever I use the drum pads too much. I set the drum pads so that they can control the drum machine in BM2 and even when in playback mode I can see the drum pads still moving about since it has a red light made within each pad indicating when its tapped.

I think this is what causes too much power to be drawn.

Anyone know how to stop the drum pads from being triggered on the midi device, so that their only used when in the drum machine menu on my ipad?

Or can anyone give me advice for this problem?

Thank you.

BM3 Session corrupting?

cte — Wed, 15 Apr 2020 19:08:46 +0000

So I’ve spent a few days getting the feel of BM3. Ive done 6 quick sessions so far. The last one seems to have corrupted though. It seems to load up fine. I presss play and then nothing happens. If I try and load another session nothing happens.. If I restart BM3 the other sessions will load and play. In the corrupted session I only used AUV3 instruments. FM Player 2, Syntronik, and two instances of SynthMaster One.

I have been searching the forum here. I saw that sessions can corrupt if BM3 closes while saving etc. Mine didn’t close while saving so I’m not sure what’s happened. Are corrupted sessions recoverable? The session I did was just a quick one, so it’s no big loss but it is worrying for future projects. Thanks!

BeatMaker 2 soundstore

retrostu — Tue, 08 Oct 2019 22:04:36 +0000

After not having any spare time to make music for a while, I’ve now re installed BeatMaker 2 on my phone and iPad but when I try to access the sound store to install my purchases, all I see is a blank screen ? Has support for version 2 stopped ?
Thanks
Stu

How to keep playing a pad in an infinite loop?

eriveraa — Fri, 12 Apr 2019 18:43:09 +0000

Maybe my question is too basic, but i think this is a really basic functionality:
I would like to press a PAD (in performance view) and keep playing the sample in an infinite loop, is that possible?
Thanks in advance.

volume sliders with nanokontrol2

pjkemp — Wed, 28 Mar 2018 17:15:22 +0000

Is there any way to map the sliders of a Korg nanokontrol2 to the volume sliders for each bank/track? I can get the transport controls working just fine but can’t figure out how to do the sliders....

Thanks in advance

Lost files

jettsalmighty — Tue, 19 Jan 2016 14:33:11 +0000

Can anyone tell me why I can save a beat 3 times if I choose to and my app will kick me out and when I get back to what I'm working on it says my file doesn't exist but has the name of the project still saved??

How to record my voice over a beat?

Sthailee — Mon, 05 Dec 2011 02:50:52 +0000

Thx in advance for helping.

LFOs in BM3?

selfinflict3 — Mon, 17 Sep 2018 18:12:58 +0000

So for some reason I thought there was an LFO in the sample edit window of BM3, I must have been confused and thinking of my mpc1000.. is there an onboard lfo in bm3? I just wanted to add a tiny bit of lfo to the pitch of my sample to give it a little tape warble without an AU..

Beatpack

Mr. Easton — Tue, 24 Jan 2012 17:29:26 +0000

Hello,

Is it possible to use the beatpack function with Beatmaker 2?

Cheers,

Session Deleted Accidentally

RonnieDylan — Wed, 28 Oct 2020 23:01:04 +0000

I have apparently deleted a session I have been working on for a while. Can anyone please guide me to where I might recover it?

downloaded Auv3 plug-in from store, not showing up in BeatMaker3

gkrypt — Thu, 26 Dec 2019 20:27:56 +0000

Hi Everyone,

Should Auv3 plug-ins appear in BM3 automatically once downloaded from the App Store? I have Lo-Fly dirt and fly tape but neither show up when I go to the plug-ins section. No idea what to do. Anyone else had this?

Thanks for any advice

HELP! Session lost!

ickymack — Thu, 12 Jul 2018 04:58:33 +0000

Hi all. I am fairly new to beatmaker3 but have loved it so far. Today I spent a solid 5hours on a track. I saved it many times and even closed and reopened the app a number of times throughout the day. Finally I decided it was time to take a break. I then opened a new session and messed around on a new track for awhile, which I also saved.However, I have never “save as”ed my first track, and since they were both made on the same day, they should have both been called Jul 11 (today’s date). However there is only one July 11 session on my iPad now and it is the more recent one. I cannot find the first session that I spent all day on anywhere. All the auto saved sessions are the recent one. I am honest freaking out because I put so much work in and am worried I somehow overwrote the first session, even though I started a new one for song 2.

Does anyone know what happened and do I have any chance of recovering the first song? I am pretty bummed

Thanks in advance

Problems with mono polyphonic pads

Wario954 — Sat, 15 Dec 2012 17:13:07 +0000

I haven't used the pads with samples in a while and I noticed today the pads are not cutting each other off when played.

Am I missing something here? Previously when I used them they were defaulted at 16 polyphonic, now they are defaulted at mono. Has anyone else experienced this? Help would be greatly appreciated.

How to BACKUP BM3 now?

DeanDaughters — Fri, 15 Sep 2017 20:50:34 +0000

Hey guys -

I do not want to install the new 3.03 update without first BACKING UP my BM3 content on both my iPads.

The option to backup via itunes is now GONE and there is NO MENTION of BACKUP in the new BM3 manual:

How do I BACK UP my BM3 content now, please?

THANKS!

I've got a session that I explicitly saved lost. How?!?!?!

vov — Fri, 04 Jan 2019 23:48:13 +0000

Glad I have an autosave which is close.
How such things even possible?
Can someone explain?
Did anybody lose the session that they saved?

Sample memory usage

kash123 — Thu, 27 Oct 2011 16:04:37 +0000

Hi,

Is it possible to change the sample memory usage, since the update it seems to be limited to 32 mb, when I know the iphone 4 can allow at least without problem at least twice as much as that. Any reason for this,or am I missing something?

About bitrate output

znomusic — Thu, 11 Jan 2018 22:02:40 +0000

Well I trying some comparation iPad vs hardware. Well BM3 is quite good. Just make some tricks to made on master : eq and comp.
But now I have a question : did the sound depends on the external sound card ? Can we push the bit rate to 96kHz ?

Note delay when using note repeat

mre8 — Thu, 28 Sep 2017 07:32:44 +0000

When a note repeat is selected, the first touch of the pad does not immediately trigger the note. Same function in BM2. What's up with that? I just learned to ignore this in BM2, but I've had enough... What gives? It's especially noticeable if note repeat is set to 1/4. There is an entire 1/4 note delay after pressing the pad. Why would Intua set this up this way...?

In the the good old MPC, you hold note repeat, slap that pad and everything makes sense. Because this carries over from BM2, I'm guessing it is a design choice??? OR, help me... I'm doing something wrong??

Iaap

Leak92 — Tue, 28 May 2019 18:56:49 +0000

I caint stop my midi keyboard from playing sounds from an iaap even when I switch it to another bank

So there is no way to delete original samples?

logictree — Sun, 30 Dec 2012 19:24:25 +0000

I've searched forum and couldn't find direct answers. But it seems like there is no way to delete original samples? So I think maybe Intua should provide a smaller version.

Is there anybody really using original drum samples? I don't mean they are not good. But I think anyone who bought Beatmaker 2 should not be a layman (it is not a cheap toy), who must have some favorite samples. I seldom use them. So it is no good to keep them (they are hugh for a 16GB iPad).

Out of space

fmachado — Fri, 02 Aug 2019 11:26:42 +0000

Hi, I went out of space on my iPad with 128gb.
And 95gb of that came only from beat maker 3.
So I start deleting folders in sessions that I don't needed anymore.
But the problem is I already deleted folders from sessions,, banks, imports, export and unsaved sessions and still don't have record any space on my iPad. The beatmaker app is still with 95gb.

Can someone tell me please what I have to do to solve this?
Because deleting files on the storage manager from the iPad it's simple impossible, cuz it show me not folders representing musics but every single wave file I have on beatmaker 3 so it's simple impossible to me to know, in 12595 wave files, what to delete and what to keep.