midi latency
hi again
i'm using BM2 with his keyboard sampler as a remote "classic rack sampler" triggered by an mpc
(with line6 midi mobilizer II)
i notice i have some delay problem, i think are pretty normal, is always a software running inside a small computer, so even if i set the midi latency to 0 on Global Midi Setup i still have from 20 to 30ms of delay...
btw i use BM2 as a long samples player, so i don't have to loop or similar... so at the end of this long intro my question is:
is it possible to cut ms from single samples or hole keyboard sampler? i usually leave some blank in front of my sampler and i trigger them before the "start point" so a trick is to cut 25ms from any sample start, just curious if u have a function like this
ps i know i can slight move trigger note from mpc to have them in sync, just a curiosuty
apologies for the long post
ale
i'm using BM2 with his keyboard sampler as a remote "classic rack sampler" triggered by an mpc
(with line6 midi mobilizer II)
i notice i have some delay problem, i think are pretty normal, is always a software running inside a small computer, so even if i set the midi latency to 0 on Global Midi Setup i still have from 20 to 30ms of delay...
btw i use BM2 as a long samples player, so i don't have to loop or similar... so at the end of this long intro my question is:
is it possible to cut ms from single samples or hole keyboard sampler? i usually leave some blank in front of my sampler and i trigger them before the "start point" so a trick is to cut 25ms from any sample start, just curious if u have a function like this
ps i know i can slight move trigger note from mpc to have them in sync, just a curiosuty
apologies for the long post
ale
Comments
I'm also interested in finding out how to sync beatmaker to my MPC using beat clock, last time i tried that it didnt work very well- Tons of jitter etc.
Intua can you give us some guidance if this is meant to work. Tight timing is everything...
btw if u use an mpc is better u trig samples from mpc... to have in perfect sync just shift back midi note so u send the midi trigger just "that little bit" before....
in case u have a sample starting at 1.1.1.1 so just cut some ms from the beginning of the sample... is live nobody will notice
good luck